1. Products
  2. R&D and Science
  3. High Performance Cameras
  4. Fixed Entry-Level Cameras
  5. FLIR A6750 SLS
Cart

Added to cart

product image

Model:

-
+
Go to cart
Continue shopping

Your order qualifies for free 2-day shipping and easy returns

Recommended for you

Longwave Infrared Thermal Camera

FLIR A6750 SLS

Model: A6751 SLS Go to Product Support
product image

The FLIR A6750 SLS longwave camera is the ideal choice for high-speed thermal events and fast moving targets. It offers extremely short integration times and windowed frame rates above 4,000 Hz, so you can freeze motion or achieve accurate temperature measurements on moving subjects. The 327,680 (640 x 512) pixel IR resolution and high sensitivity produce crisp imagery, well suited to electronics inspections, scientific research, and more.

Sales Contact Contact Sales
  • Fast Integration Times

    FLIR A6750 SLS capture all pixels from a scene simultaneously in under 190 µs with full frame-rates of 125 Hz—both crucial to imaging fast-moving objects.

  • Standard Video Interfaces

    Gigabit Ethernet and analog video are simultaneously active yet independently controlled allowing greater flexibility for recording and display purposes.

  • Custom Cold Filters

    Add custom cold filters for spectral detection to image through glass, measure the temperature of thin film plastics, and more.

Contact Sales

Want more information on this product?

Call 0049 69-950090 0 to speak with a knowledgeable specialist.

Specifications
Resolution
640 × 512
Pixel Size [Square]
15 µm
Spectral Range
7.5 µm (lower), 10–11µm (upper)
Detector Type
Strained-Layer Superlattice
Camera f-number
f/2.5
Frame Rate [Full Window]
Programmable; 0.0015 Hz to 125 Hz
Integration Time
480 ns to ~full frame
Standard Temperature Range [with band matched optics]
-20°C to 350°C (-4°F to 662°F)
Optional Temperature Range [with band matched optics]
250°C to 2000°C/482°F to 3632°F (ND1); 500°C to 3000°C/932°F to 5432°F (ND2)
Filter Holder [Warm]
Behind lens mount for standard 1 inch diameter filters
Focus
Manual
Imaging & Optical
Available Lenses
17 mm, 25 mm, 50 mm, 100 mm, 200 mm
Camera f-number
f/2.5
Close-up Lenses/Microscopes
1X
Filter Holder [Warm]
Behind lens mount for standard 1 inch diameter filters
Image Time Stamp
Yes
Integration Time
480 ns to ~full frame
NEI [Typical]
N/A
Noise Floor [Typical]
N/A
On Camera Image Storage
None
Overlay
Fixed configuration, can be turned off
Pixel Clock
50 MHz
Pixel Size [Square]
15 µm
Radiometric Data Streaming
Gigabit Ethernet (GigE Vision)
Readout Modes
Asynchronous integrate while read; asynchronous integrate then read
Readout Type
Snapshot
Sensor Cooling
Closed-cycle rotary
Standard Video
SDI
Standard Video Zoom
Automatic, variable
Subwindow Modes
Flexible windowing down to 16 × 4 (steps of 16 columns, 4 rows)
Thermal Sensitivity_NETD [typical]
≤45 mK (≤40 mK typical)
Video Modes
SDI: 720p@50/59.9, 1080p@25/29.9
Measurement & Analysis
Ambient Drift Compensation [with factory cal]
Yes
Optional Temperature Range [with band matched optics]
250°C to 2000°C/482°F to 3632°F (ND1); 500°C to 3000°C/932°F to 5432°F (ND2)
Standard Temperature Range [with band matched optics]
-20°C to 350°C (-4°F to 662°F)
General
Size [L x W x H ] w/o Lens
226 × 102 × 109 mm (8.9 × 4.0 × 4.3 in.)
Related Content
Accessories
Cases and Pouches
Batteries and Power
Cables Adapters
Related Documents
Export Restrictions

Export Restrictions

The information contained in this page pertains to products that may be subject to the International Traffic in Arms Regulations (ITAR) (22 C.F.R. Sections 120-130) or the Export Administration Regulations (EAR) (15 C.F.R. Sections 730-774) depending upon specifications for the final product; jurisdiction and classification will be provided upon request.

FLIR A6750 SLS - Model: A6751 SLS

Change Selection

Want more information on this product?

Call 0049 69-950090 0 to speak with a knowledgeable specialist.